XL7Broadband Antenna Signal Distributor Main Unit (Dual 8-Channel)
The power supply of the main unit of the broadband antenna signal distributor is 12VDC, with a maximum output current of 2A. It has 16 input and 2 output channels. The RF connector is BNC and the impedance is 50Ω. The antenna is powered by 12V (maximum current 200mA). The working frequency range is 450MHz to 960MHz. It has good output channel isolation, gain, noise coefficient, third-order intermodulation and standing wave performance. The operating temperature range is wide and the power consumption is less than 20W.
Power requirement: 12VDC
Power output: 12VDC
Output current: Maximum 2A
Distributor channels: Binary sixteen outputs
Radio frequency connector type: BNC
Impedance: 50Ω
Antenna power supply: 12V (maximum current 200mA)
Working frequency range: 450 MHz~960 MHz
Output channel isolation: 20 dB (typical)
Distributor gain: 0 dB ± 3 dB
Distributor noise coefficient: Less than 2.5 dB
Distributor output third-order intermodulation: Better than +39 dBm
Distributor input and output standing wave ratio: Less than 1.5
Operating temperature: -20℃~+85℃
Power consumption: Less than 20W
Power output: 12VDC
Output current: Maximum 2A
Distributor channels: Binary sixteen outputs
Radio frequency connector type: BNC
Impedance: 50Ω
Antenna power supply: 12V (maximum current 200mA)
Working frequency range: 450 MHz~960 MHz
Output channel isolation: 20 dB (typical)
Distributor gain: 0 dB ± 3 dB
Distributor noise coefficient: Less than 2.5 dB
Distributor output third-order intermodulation: Better than +39 dBm
Distributor input and output standing wave ratio: Less than 1.5
Operating temperature: -20℃~+85℃
Power consumption: Less than 20W
PRODUCT DETELS / Details
-.png "XL71宽频天线信号分配器主机(双8路)-")
I Technical Specifications
Power requirements:12VDC
Power Output:12VDC
Output current:Maximum 2A
Distribution channel:Binary to hexadecimal conversion
RF connector type:BNC
Impedance:50Ω
Antenna power supply:12V(Maximum current: 200mA)
Work Frequency Range:450MHz~960MHz
Output channel isolation degree:20dB(Typical)
Distributor gain:0dB±3dB
Noise coefficient of the distributor:Less than 2.5 dB
The distributor outputs third-order intermodulation.Better than +39 dBm
Distributor input/output standing wave:Less than 1.5
Working temperature:-20℃~+85℃
Power consumption:Less than 20W
